Detailed Product Description

FEATURES
 

1) Accurate and consistent test force, controlled by precision shear pin. Works in static type and hammer impact type and follows Brinell hardness test method.

2) According to the similarity principle of Brinell hardness test, this tester has 1580kg test force, 7.26mm spherical indenter, F/D²=30. The test condition is equivalent to the commonly used 3000kg test force, 10mm ball condition.

3) High accuracy and repeatability; tested by National Institute of Metrology with tolerance less than ±3%. The accuracy meets the requirements of ISO 6506 and is no lower than that of the bench Brinell hardness tester.

4) Easy, quick and simple operation. Static type for testing medium and small size orkpieces; hammer impact type for testing large workpieces.

5) Only one inexpensive shear pin is consumed in each test.

6) Good choice to replace Leeb hardness tester and Poldi type hammer impact hardness tester with lower accuracy.

Technical Parameters

Standard Package

Tester                                              

Test head

7.26mm steel indenter

Flat anvil

V anvil

Support handle

Indenter head holder

Shear pins (250 pcs)

Brinell test block

Pin removal tool

2 rubber protective caps

20x reading microscope

Carrying case

Optional

7.26mm steel indenter

4.0mm carbide indenter

Test head

Shear pins (bag of 250 pcs)

Brinell test block

Dome anvil

40x reading microscope

3 lb hammer